BWWYM - S-392 STATIC DISSIPATIVE TILE POLISH
- MSDS: BWWYM
- Manufacturer: ARMSTRONG WORLD INDUSTRIES INC
- Product Name: S-392 STATIC DISSIPATIVE TILE POLISH
- National Stock Number: 7930-01-335-9926
Product Identification
Product ID:S-392 STATIC DISSIPATIVE TILE POLISH
MSDS Date:10/01/1993
FSC:7930
NIIN:01-335-9926
MSDS Number: BWWYM
Responsible Party
LANCASTER, PA 17604-5000
US
Emergency Phone: 717-396-2328/2935
Info Phone: 717-396-2328/2935
Cage: 03938
Contractor
Telephone: 717-396-2328; 717-396-2935
Cage: 03938
Ingredients
DIETHYLENE GLYCOL ETHYL ETHER, CARBITOL, CARBITOL
CAS: 111-90-0
RTECS: KK8750000
Fraction By Weight: 2-3%
DIPROPYLENE GLYCOL METHYL ETHER, DOWANOL DPM, DIPROPYLENE
CAS: 34590-94-8
RTECS: JM1575000
Fraction By Weight: 3-4%
OSHA PEL 100 PPM SKIN
ACGIH TLV: 606 MG/CUM
POLYACRYLATE RESIN
WETTING AGENTS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
299 G/L (W/OUT WATER)
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION. SKIN:
PROLONGED CONTACT OF UNDILUTED PRODUCT MAY CAUSE SLIGHT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. IF WEARING CONTACT
LENSES, THEY MUST BE REMOVED IMMEDIATELY & FLUSHING CONTINUED.
SKIN: FLUSH WELL W/WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:SCC
Flash Point:212F
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:MOP UP/OTHER WISE PICKUP PRODUCT W/ABSORBING
MATERIALS. RINSE AREA W/CLEAN, COLD WATER; THEN DRY.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:AVOID CONTACT W/EYES & PROLONGED CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:SHOULD NOT BE REQUIRED
Ventilation:NORMAL, AMBIENT AIR CIRCULATION IS ADEQUATE.
Protective Gloves:LATEX/RUBBER
Eye Protection:SPECIAL TYPE GLASSES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
PH: 8.7-8.9.
Chemical Properties
Spec Gravity:1.036
pH:(SUPP)
Solubility in Water:COMPLETE
Appearance and Odor:MILKY WHITE EMULSION
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING
Disposal
Waste Disposal Methods:DON'T RESUE CONTAINER. DON'T FLUSH UNUSED
CONTENTS/RESIDUE DOWN DRAINS. DISPOSE OF CONTAINER & ANY UNUSED
CONTENTS IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.